Inquiry CartInquiry Cart
首页 - DAC /AOC - 800G DAC AOC - 800G OSFP Breakout DAC
800G OSFP to 2x 400G QSFP112 Copper Breakout Cable,2 Meter
800G OSFP to 2x 400G QSFP112 Copper Breakout Cable,2 Meter
800G OSFP to 2x 400G QSFP112 Copper Breakout Cable,2 Meter
800G OSFP to 2x 400G QSFP112 Copper Breakout Cable,2 Meter
800G OSFP to 2x 400G QSFP112 Copper Breakout Cable,2 Meter
800G OSFP to 2x 400G QSFP112 Copper Breakout Cable,2 Meter

800G OSFP Breakout DAC

800G OSFP to 2x 400G QSFP112 Copper Breakout Cable,2 Meter

AscentOptics O2Q12-800G-CPxM is an 800Gb/s Twin-port OSFP (Octal Small Form-factor Pluggable) -to- 2x 400Gb/s QSFP112 (Quad Small Form-factor Pluggable 112G) passive Direct Attach Copper (DAC) dual breakout (aka splitter) cable for 400Gb/s AscentOptics End-to-End Infiniband and Ethernet solutions. It has identical design and internals as the Single port OSFP version, only with different connector shells. The DAC firmware supports both InfiniBand and Ethernet and is automatically enabled depending on the protocol of the switch attached to. The 8-channel Twin port OSFP end uses a finned top form-factor for use in Quantum-2 and Spectrum-4 switch cages. The two 400G ends support 4-channels of 100G-PAM4 (400G) and use a flat top QSFP112 for use in ConnectX-7 adapters and BlueField-3 DPUs using riding heat sinks on the connector cage. DAC cables are the lowest-cost, lowest-latency, near zero power consuming high-speed links available due to their simplicity of design and minimal components. The “passive” term refers to the copper cable containing no electronics in the data path. Each end includes an EEPROM which provides product identification and characteristics to the host system. Every cable length is tuned to reduce internal signal noise and back reflections. Thin 30AWG is used for 1 &1.5-meter lengths and thicker 26AWG for 2-3-meters. Main use is linking an 800Gb/s Quantum-2 switch or Spectrum-4 switch to QSFP112-based 400Gb/s ConnectX-7 PCIe network adapters cards and BlueField-3 DPUs. AscentOptics’ cable solutions provide power-efficient connectivity enabling higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers. Rigorous cable production testing ensures best out-of-the-box installation experience, performance, and durability.

原产地 : 中国

交货时间 : 咨询客户经理

尺寸(长x宽x高) : -

净重 : 0.25公斤

证书:

证书 证书 证书 证书 证书 证书 证书

P/N: O2Q12-800G-CP2M

添加报价
产品详情
产品型号 O2Q12-800G-CP2M 电缆类型 DAC
连接器类型 OSFP 至 QSFP112 速率 800G/秒
长度 2米 工作温度 0~ 70 °C (32 ~ 158°F)
外套材质 聚氯乙烯 (OFNR) 电压 3.3V
无源/有源 无源 最小弯曲半径 89毫米
协议 OSFP MSA、CMIS、ETC 800GBASE-CR8 任意波形发生器 30
主要特点
800Gb/s to two 400Gb/s data rates 100G-PAM4 modulation 1-3m lengths OSFP and QSFP112 ends each consume 0.1Watts OSFP head end is CMIS based QSFP112 ends are SFF-8636 based Operating case temperature 0-70°C Hot pluggable RoHS based LSZH (Low Smoke Zero Halogen) jacket
应用
2x400G NDR InfiniBand Quantum-2 or Spectrum-4 Ethernet switch-to-two 400Gb/s QSFP112 ConnectX-7 and/or BlueField-3 DPUs
资料下载(PDF)

请和我们的销售代表联系!

相关产品