100G QSFP28 eCWDM4 / 4WDM-10 10km Transceivers

100G QSFP28

100G QSFP28 eCWDM4 / 4WDM-10 10km Transceivers

Ascent Optics’ QSP-100C431-10CL is a transceiver module designed for low cost 10km optical communication applications. The module converts 4 inputs channels (ch) of 25Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 100Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331nm as members of the CWDM wavelength grid defined in ITU-T G.694.2. It contains a duplex LC connector for the optical interface and a 38-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. Host FEC is required to support up to 10km fiber transmission.

原产地 : 中国

交货时间 : 采购订单确认后 3 -7 天

尺寸（长x宽x高） : 120.77*18.5*13.2

净重 : 0.043公斤

证书:

P/N: QSP-100C431-10CL

添加报价

产品详情

产品型号	QSP-100C431-10CL	封装	QSFP28
速率	100G/ps	距离	10KM
波长	CWDM4	工作温度	0 至 70°C（32 至 158°F）
接口	Duplex LC	电压	3.3V
电缆类型	单模光纤	数字诊断功能	是的
变送器类型	波分复用DFB	接收器类型	PIN
发射功率	-6.5~+2.5dBm	接收灵敏度	<-20dBm
协议	符合 MSA 标准	保修单	3年

主要特点

Compliant to QSFP28 Extended CWDM4 (eCWDM4) MSA Four CWDM lanes MUX/DEMUX design Supports 103.1Gb/s aggregate bit rate Up to 10km transmission on single mode fiber (SMF) with RS-FEC Operating case temperature: 0 to 70 o C 4x25G electrical interface (OIF CEI-28G-VSR) Maximum power consumption 3.5W LC duplex connector RoHS compliant

应用

Data Center 100G Ethernet 100G Campus Link Enterprise networking

资料下载（PDF）

Datasheet

产品中心

应用中心

新闻事件

关于我们

联系我们

支持

Products

100G QSFP28 eCWDM4 / 4WDM-10 10km Transceivers

产品详情

主要特点

应用

资料下载（PDF）

相关产品