200G CFP2 200G QSFP56 200G QSFP28-DD
Switch Language
English 简体中文 Français Deutsch Italiano Русский язык Español Português Nederlands Ελληνικά 日本語 한국어 العربية हिन्दी Türkçe Bahasa Indonesia Tiếng Việt ไทย বাংলা فارسی Polski
Inquiry CartInquiry Cart
Inquiry CartInquiry Cart
Switch Language 切换语言
返回
选择语言
首页 - 搜索
根据您输入的关键字，共找到75条相关记录
Unveiling the Power of 200G QSFP56 Transceivers: A Technology Deep Dive
Unveiling the Power of 200G QSFP56 Transceivers: A Technology Deep Dive
2024-09-20 11:46:23
400G QSFP-DD to 2x 200G QSFP56 Copper Breakout Cable,3 Meters,Passive
400G QSFP-DD to 2x 200G QSFP56 Copper Breakout Cable,3 Meters,Passive
2024-04-02 16:50:29
Q2Q56-400G-CPxM cable assembly is used in 2 X 200 Gigabit Ethernet links over copper cable, which provides connectivity between system units with a 400GbE connector on one side and 2 separate 200GbE connectors on the other 2 sides. The cable connects data signals from each of the 16 pairs on the single QSFP56-DD end to the dual pairs of each of the QSFP56 multiport ends.
400G QSFP-DD to 2x 200G QSFP56 Copper Breakout Cable,2.5 Meters,Passive
400G QSFP-DD to 2x 200G QSFP56 Copper Breakout Cable,2.5 Meters,Passive
2024-04-02 16:50:29
Q2Q56-400G-CPxM cable assembly is used in 2 X 200 Gigabit Ethernet links over copper cable, which provides connectivity between system units with a 400GbE connector on one side and 2 separate 200GbE connectors on the other 2 sides. The cable connects data signals from each of the 16 pairs on the single QSFP56-DD end to the dual pairs of each of the QSFP56 multiport ends.
400G QSFP-DD to 2x 200G QSFP56 Breakout AOC Cable,10 Meters
400G QSFP-DD to 2x 200G QSFP56 Breakout AOC Cable,10 Meters
2024-03-14 14:24:39
AscentOptics' 400G QSFP-DD to 2x 200G QSFP56 Breakout AOC (Active Optical Cable) assemblies are designed to support 400G/2x200G Ethernet and InfiniBand HDR/HDR100, suitable for data center and HPC (High-Performance Computing) links up to 100m over multi-mode fiber.
200G QSFP56 SR4 850nm 100M MMF MPO-12 Transceivers
200G QSFP56 SR4 850nm 100M MMF MPO-12 Transceivers
2024-03-08 16:42:15
Ascent Optics’ Q56-200M485-1HCM 200G QSFP56 SR4 is a 4×50Gbps multimode fiber, hot pluggable optical transceiver. The module integrates four parallel lanes with baud rate at 53.125GBd PAM4 modulation each lane. It can transmit up to 70m on fiber OM3 fiber or 100m on OM4 fiber with FEC.
200G QSFP56 FR4 1310nm 2KM SMF LC Transceivers
200G QSFP56 FR4 1310nm 2KM SMF LC Transceivers
2024-03-08 16:42:15
Ascent Optics’ Q56-200C431-02CL The 200G QSFP56 FR4 modules built-in optical MUX and DEMUX component. This transceiver is designed with 4pcs CWDM DFB laser (Distributed Feedback Laser) and 4pcs photodiodes. The module has 4 independent electrical input/output channels operating at 53.125Gb/s per channel. It’s designed with DFB laser which can offer low cost, low power consumption, the high-temperature range for customers. It provides an excellent solution for 200G data transmission over up to 2km single-mode fiber. The DDM functionality (alarm and warning features) is integrated into the design via an I2C serial interface per the Multi-Source Agreement (MSA) SFF-8665.
400G OSFP twin port to 2x 200G QSFP56 Copper Breakout Cable,2 Meter
400G OSFP twin port to 2x 200G QSFP56 Copper Breakout Cable,2 Meter
2024-01-29 17:04:52
AscentOptics' 2O2Q56-400G-CP2M is a passive Direct Attach Copper (DAC) cable with an OSFP-based twin-port 2x 200Gb/s connector to two 200Gb/s QSFP56s, and is a high-speed 200Gb/s splitter cable for InfiniBand and Ethernet networking. The DAC firmware supports both InfiniBand and Ethernet and is automatically enabled depending on the protocol of the switch attached to. The 8-channel twin-port OSFP end uses a finned top form-factor for use in Quantum-2 and Spectrum-4 switch cages. The two 400G ends support 4-channels of 50G-PAM4 (200GbE/HDR) and use a flat top QSFP56 for use in ConnectX-6/7 adapters and BlueField-2/3 DPUs using riding heat sinks on the connector cage.
400G OSFP twin port to 2x 200G QSFP56 Copper Breakout Cable,1.5 Meter
400G OSFP twin port to 2x 200G QSFP56 Copper Breakout Cable,1.5 Meter
2024-01-29 17:03:47
AscentOptics' 2O2Q56-400G-CP1.5M is a passive Direct Attach Copper (DAC) cable with an OSFP-based twin-port 2x 200Gb/s connector to two 200Gb/s QSFP56s, and is a high-speed 200Gb/s splitter cable for InfiniBand and Ethernet networking. The DAC firmware supports both InfiniBand and Ethernet and is automatically enabled depending on the protocol of the switch attached to. The 8-channel twin-port OSFP end uses a finned top form-factor for use in Quantum-2 and Spectrum-4 switch cages. The two 400G ends support 4-channels of 50G-PAM4 (200GbE/HDR) and use a flat top QSFP56 for use in ConnectX-6/7 adapters and BlueField-2/3 DPUs using riding heat sinks on the connector cage.
400G OSFP twin port to 2x 200G QSFP56 Copper Breakout Cable,1 Meter
400G OSFP twin port to 2x 200G QSFP56 Copper Breakout Cable,1 Meter
2024-01-29 17:02:36
AscentOptics' 2O2Q56-400G-CP1M is a passive Direct Attach Copper (DAC) cable with an OSFP-based twin-port 2x 200Gb/s connector to two 200Gb/s QSFP56s, and is a high-speed 200Gb/s splitter cable for InfiniBand and Ethernet networking. The DAC firmware supports both InfiniBand and Ethernet and is automatically enabled depending on the protocol of the switch attached to. The 8-channel twin-port OSFP end uses a finned top form-factor for use in Quantum-2 and Spectrum-4 switch cages. The two 400G ends support 4-channels of 50G-PAM4 (200GbE/HDR) and use a flat top QSFP56 for use in ConnectX-6/7 adapters and BlueField-2/3 DPUs using riding heat sinks on the connector cage.
200G QSFP56 Active Copper Cable,5 Meter
200G QSFP56 Active Copper Cable,5 Meter
2024-01-19 15:43:14
AscentOptics' Q56-200G-AC5M is an active copper cable, this cable contains four high-speed copper pairs in each direction, with each lane operating at data rates of up to 50Gb/s. And it provides a high-speed and cost-effective alternative to fiber optics in HDR 200Gb/s InfiniBand applications and power-efficient connectivity for short distance interconnects.
搜索结果